Paton ProTIG-200 - Acceptance Certificate

PATON ProTIG AC/DC TIG/MMA - 28 -
hose at a sufficient distance to avoid damaging the soldered electronic components and
mechanical parts.
The main warranty also does not cover damaged external parts of the equipment that are
subject to physical contact and accessories/consumables, which must be claimed within two
weeks of the date of sale:
- On and off button,
- Welding parameter control knob,
- Cable and hose connectors,
- Control connectors,
- Power cord and power cord plug,
- Carrying handle, shoulder strap, case, box,
- Electrode holder, ground clamp, torch, welding cables and hoses.
In the event of warranty service, the customer must ship the welder at his own
expense.
The seller reserves the right to refuse to provide warranty repairs, or set the month and year
of manufacture of the device (determined by the serial number) as the date of the warranty
obligations beginning:
- In case of loss of the certificate by the owner,
- In the absence of correct or any filling of the certificate by the seller when selling the machine,
- The warranty period is extended for the period of warranty service in the service center.
16. ACCEPTANCE CERTIFICATE
PATON ProTIG-200/315-400V AC/DC
Serial number __________________, recognized as serviceable.
Sale date ”_____”________________20____.
Seal here. _____________________
(seller's signature)
==================================================================
Date of acceptance for repair ”_____”_________________20____г.