Paton ProTIG-200 - Table of Contents

CONTENTS
1. General provisions
3
2. Technical characteristics
4
3. Control elements designations, setting of the unit
6
3.1 Designation of parameters of all welding modes
7
3.2 Resetting the device to factory settings
8
3.3 Selecting the interface language
8
4. TIG AC welding cyclogram
8
5. Commissioning
17
5.1 Intended use
17
5.2 Placement requirements
17
5.3 Mains connection
17
5.4 Connection of the mains plug
17
6. Manual arc welding with coated electrode (MMA)
19
7. Handheld arc welding with a non-fusible electrode in an inert
gas environment (TIG AC/DC)
19
8. Pedal operation in TIG AC/DC mode
20
9. Maintenance
20
10. Storage regulations
20