Paton ProTIG-200 - Scope of Delivery; Safety Instructions

- 25 - PATON ProTIG AC/DC TIG/MMA
Control limits of welding current, A
5 – 200
25 – 315
Welding current (DC) at:
5 min/40% LD
5 min/100% LD
200
126
315
180
Max. power input, kVA
6.3
13.5
Normal operating voltage, V:
- ММА
- TIG AC/DC
20.4 – 26.8
10.4 – 18
13. SCOPE OF DELIVERY
Argon-arc inverter – 1 pc;
ABITIG Argon-arc torch – 1 pc;
ABICOR BINZEL welding cable with ground terminal, 3 m – 1 pc;
Data sheet and operating manual – 1 pc;
Shoulder strap (for ProTIG-200 AC/DC model) – 1 pc;
PATON branded
corrugated box – 1 pc; Argon quick connector, 8 mm – 1 pc.
14. SAFETY INSTRUCTIONS
14.1 General Instructions
The welding machine is manufactured following technical standards and
established safety regulations. Nevertheless, if handled improperly, there is a risk of
:
-
Injury to operating personnel or a third party;
-
Damage to the machine or material assets in the workplace; - Disruption of an
efficient work process
.
All persons involved in the commissioning, operating, maintenance and servicing
of the machine must:
-
Take appropriate certification;
-
Possess knowledge of welding;
-
Adhere strictly to these instructions.
Faults that could impair safety must be eliminated immediately.
14.2 User obligations
The user is obliged to allow only those persons to work on the machine who:
-
The user is obliged to allow only those persons to work on the machine who;