- 5 - PATON ProTIG AC/DC TIG/MMA
1. GENERAL PROVISIONS
The PATON ProTIG-200/315-400V AC/DC argon-arc inverter is designed for arc welding:
- TIG AC/DC (constant/variable
current); - ММА (direct current);
- RIV (rivet weld mode).
The best offer for DC and AC welding of a wide range of materials: aluminum, aluminum
alloys (TIG AC mode), parts and materials made of steel, non-ferrous metals and copper
alloys (TIG DC mode). The unit can also be used for welding with coated electrodes (MMA
mode). The inverter provides excellent ignition and a constant and stable arc, highquality
welds and easy operation.
By increasing the frequency of the voltage supplied to the transformer, it is tens of times
smaller, which is why the unit has several times less weight and dimensions with the same
output parameters in comparison with the classic equipment.
Main advantages:
1. Contact and non-contact (built-in oscillator) arc ignition;
2. Storing up to 10 user-defined welding modes;
3. Button mode on 2T and 4T torches;
4. Foot pedal support for stepless adjustment (PED)
5. Pulse function in TIG AC/DC, MMA modes;
6. Increased reliability in dusty environments;
7. Availability of RIV rivet weld;
8. When the temperature reaches 100 ˚C, the power unit will shut down until the
temperature decreases;
9. All electronics in the unit are impregnated with two layers of high-quality varnish,
which ensures the reliability of the product during its entire service life;
10. Infinitely adjustable welding parameters;
11. Stabilization of arc burning in TIG AC/DC modes;
12. Adaptive control of the fan depending on the temperature;
13. The unit has a state-of-the-art digital interface with LCD display, which makes it
possible to adjust the machine to the welding mode;
14. Three interface languages are supported:
- English;
- Russian; - Ukrainian.
To Next Page
Loading...
