Paton ProTIG-200 - Page 8

- 7 - PATON ProTIG AC/DC TIG/MMA
Cyclogram parameters in TIG AC/DC modes
21.
Safety gas time before welding
0.1-25 sec
0.1-25 sec
22.
Adjusting start current
5-185 A
25-300 A
23.
Adjusting current ramp up time
0-15 sec
0-15 sec
24.
Adjusting current decay time
0-25 sec
0-25 sec
25.
Adjusting end current
5-185 A
25-300 A
26.
Post weld safety gas time
0.1-25 sec
0.1-25 sec
27.
AC frequency
15-200 Hz
15-70 Hz
28.
Polarity balance for AC welding
15-90%
20-80%
Pulse function parameters
29.
Pulse frequency
1-200 Hz
1-100 Hz
30.
Pulse balance
15-85 %
15-85 %
31.
Lower current
5-195 A
25-300 A
RIV mode parameters
32.
Point time
0.5-10 sec
0.1-10 sec
33.
Peak current
5-200 A
25-315 A
Functions in MMA mode
34.
AntiStick
ON/OFF option
ON/OFF option
35.
HotStart
Adjustment
1100%
Adjustment 0-100%
36.
ArcForce
Adjustment
1100%
Adjustment 0-100%
Mass and dimensions
37.
Dimensions
465х150х350 mm
380х480х330
38.
Weight
12.5 kg
23 kg
Connection to the power line/power panel (at 25ºC) WARNING!
Consider wall and other extension cords!