To Previous Page

System

Exit button....................................................................................................... yes

Sounder connection...............................................................................yes

(Note 5)

Door forced alarm............................................................................................. yes

Door relock on closing ...........................................................................yes (Note 6)

Silent Operation................................................................................................ yes

Door Open time ............................................................................... 1 to 60 seconds

Card plus PIN (Personal identification number)..........................................yes (Note 7)

Fail open locks.................................................................................................. yes

Operates a relay ............................................................................................... yes

Water resistant...................................................................................................no

Operating temperature .......................................................................-20˚C to 55˚C

Size of control unit board .................................................................71 x 70 x 23mm

Supply Voltage ...................................................................................9V to 14v DC.

Continuous output current...............................................................relay switches 4A

Output current for sounder.................................................................................. 1A

Quiescent current...............................................................80mA for control unit only

Note 1: Function cards are required to enable this feature

Note 2: A time clock must be fitted to implement this feature

Note 3: Use CR 9540 cable. Use spare cores to double the +12V and 0V connections.

Note 4: Wire the time clock across Black/Exit to mimic the exit button being held closed.

Note 5: Can be used with contacts for door forced open alarm

OR as a bell/duress code output with a keypad

Note 6: This feature only works with door contacts fitted to the system.

Note 7: Requires the PROXIMITY KP keypad.

Chapter 9 Specification 29

Paxton Switch2 User Manual

Other manuals for Paxton Switch2