Paxton Switch2 User Manual

Chapter 2 About…
Operating modes
Switch2 control unit
Power supplies
Operating modes
TOUCHLOCK
Switch2 can support 2 keypads for Code in and Code out applications. The control unit is
programmed through the keypad. Below are the various programming options.
Single/multiple code mode
Switch2 can be programmed to work with a single code or with more than 1 code. The
maximum number of codes is 50.
Normal, Toggle and Duress
It will be possible to program a code as:
• Normal code – operates the relay for the door open time.
• Toggle code – toggles the relay output
• Duress code – operates the relay for the door open time & the bell output.
Silent operation
The controller can be programmed to beep or not to beep when keys are pressed.
Lockout
The keypad can be set to lockout after too many incorrect key presses.
Door Open Time
The relay can be set to switch the relay contacts for any time from 1 to 60 seconds.
Remote Button
Switch2 supports exit buttons that can be programmed to either toggle the relay or to
power the relay for the defined door open time.
Data Reset
The Switch2 can be reset from the keypad.
Chapter 2 About 5

Paxton Switch2 Specifications

General

Type	Proximity access card
Material	Plastic
Product color	Black, Green
Wireless connection	Yes
Operating temperature (T-T)	0 - 55 °C

Weight and Dimensions

Depth	49 mm
Width	28 mm
Height	11 mm