Install the Processor
This mainboard has a Slot-1 that can be installed with any Slot-1
processor cartridge including the Pentium-III, Pentium-II, and the
SEPP Celeron. It also has a Socket-370 that can be installed with
the Celeron processor which is shipped in a PPGA (Plastic Pin
Grid Array) package. To ensure reliability, ensure that your
PPGA Celeron processor has a heatsink/cooling fan assembly.
You cannot install a PPGA and a Slot-1 processor cartridge
together. Take care that you do not try to install a Socket-7
processor into the Socket-370. A Socket-7 processor such as the
Pentium-MMX, or the AMD K5/K6 does not fit in the socket-370.
The following table lists the processors that are currently supported
by this mainboard. New processors may be a released after this
manual is printed.
Processor
Cartridge
Clock Rate
MHz
Processor
Socket
System Bus
MHz
Pentium-III 600 Slot-1 100
Pentium-III 550 Slot-1 100
Pentium-III 500 Slot-1 100
Pentium-III 450 Slot-1 100
Pentium-II 450 Slot-1 100
Pentium-II 400 Slot-1 100
Pentium-II 350 Slot-1 100
Pentium-II 333 Slot-1 66
Pentium-II 300 Slot-1 66
Pentium-II 266 Slot-1 66
Pentium-II 233 Slot-1 66
SEPP Celeron 433 Slot-1 66
SEPP Celeron 400 Slot-1 66
SEPP Celeron 366 Slot-1 66
SEPP Celeron 333 Slot-1 66
SEPP Celeron 300A Slot-1 66
SEPP Celeron 300 Slot-1 66
SEPP Celeron 266 Slot-1 66
PPGA Celeron 533 Socket-370 66
PPGA Celeron 500 Socket-370 66
PPGA Celeron 466 Socket-370 66
PPGA Celeron 433 Socket-370 66
PPGA Celeron 400 Socket-370 66
PPGA Celeron 366 Socket-370 66
PPGA Celeron 333 Socket-370 66
PPGA Celeron 300 Socket-370 66
To Next Page
Loading...
