Chapter 4
Software & Applications
Introduction
The support software CD-ROM that is included in the mainboard
package contains all the drivers and utility programs needed to
properly run our products. Below you can find a brief description
of each software program, and the right location for your
mainboard version. More information on each individual program
might be available in a README file, located in the same
directory as the software.
In order to run the software, put the support software CD-ROM in
the CD-ROM drive, and execute the EXE file name given in the
description below.
Note: The correct path name for each software driver is
provided, where D: identifies the CD-ROM drive letter –
modify if necessary.
Bus Master IDE Driver
The IDE Bus Master Driver allows the system to properly manage
the IDE channels on the mainboard. You need to install an IDE
driver if you are running Windows 9X/NT.
♦ Windows 9X – D:\IDE\M726MRT\WIN9X\SETUP.EXE
♦ Windows NT4.0 – D:\IDE\M726MRT\NT40
AGP Driver
The AGP Driver allows the system to properly manage the AGP
slot on the mainboard.
♦ Windows 9X – D:\VGA\M726MRT\SETUP.EXE
USB Driver
The USB Driver allows the system to recognize the USB ports on
the mainboard. You need to install this driver if you are running
Windows 95. This driver is available for:
To Next Page
Loading...
