PC Chips M726MRT - Power Management Setup Page

USWC Memory
Gap Size
This item sets the memory gap size for USWC
(Un-cacheable Speculative Write Combining)
mode.
AT Bus Clock
This item sets the clock speed for the AT ISA
bus.
ISA Line Buffer
Use this item to enable or disable the line buffer
for the ISA bus.
Delay
Transaction
This item can be enabled if the system has an
embedded 32-bit write buffer to support delay
transaction cycles. Leave this item at the default
value.
OnBoard USB
Function
Enable this item if you plan on using the USB
(Universal Serial Bus) ports integrated on this
mainboard.
USB Function
for DOS
Enable this item if you plan on using the USB
ports while working in the DOS environment.
Power Management Setup Page
This page sets some of the parameters for the system power
management operation.