Page 10 of 24
TAMPER EVIDENT NECK BANDING AND SHRINKSLEEVE LABELING MACHINERY
8 Sheehan Avenue, South Norwalk, CT 06854 USA 203-853-1516 F 203-854-0834 www.pdc-corp.com
4. CONTROLS
4.1 Power
The electrical power for this tunnel may vary. Please refer to the installation
drawing of your particular unit (in the Assembly Drawings tab of this binder) for
details.
4.2 Exhaust Blower
To turn on the exhaust blower, locate the Lenze VFD on the blower that is located
downstream from the tunnel, and press the green button on it.
The Lenze Operating Manual is included in the Literature section that accompanies
this manual. Please see pages 22-24 of that operating manual especially, as it
shows the basic keypad functions.
Lenze AC Tech SMVector Control Box
To Next Page
Loading...