Page 3 of 24
TAMPER EVIDENT NECK BANDING AND SHRINKSLEEVE LABELING MACHINERY
8 Sheehan Avenue, South Norwalk, CT 06854 USA 203-853-1516 F 203-854-0834 www.pdc-corp.com
1. INTRODUCTION
1.1 Overview
The PDC Model KST80-712 is for use in shrink-fitting the labels or neckbands to
consumer product containers, downstream of the label/neckband application point
on a production-line conveyor.
1.2 Confidentiality
This manual and the information contained herein are confidential property of PDC
International Corporation. They may not be reproduced and may only be used in
conjunction with the purchased PDC tunnel.
1.3 Manual Storage
Please keep this manual in a safe and accessible place for all operators and other
parties that may be responsible for this machine.
1.4 Warranty Note
The machine is warranted as per PDC "terms and conditions" to work with the
materials and products with which it was tested.
To Next Page
Loading...