VENTLESS HOOD SAFETY PRECAUTIONS
MODELS VL30 / VL50
CAUTION
Ensure the unit is position to maintain 18” clear above the hood
body (excluding dampers, and 18” clear to the left (side with
the pull station). 0” to the read and 0” to the right.
The unit must be adequately and properly grounded. Improper grounding
may result in electrical shock.
and the unit is properly grounded.
The wiring diagrams contained in this manual should aid your electrician in
the installation of your unit.
The electronic components of the Control Panel are impact-sensitive.
Exercise care around the Control Panel to maintain proper operation.
DO NOT install the unit next to combustible walls and materials. failure to
Turn off the unit and unplug the power cord before cleaning or performing
maintenance.
DO NOT hose down the unit’s interior, or exterior with water.
During cleaning of the unit:
DO NOT modify, alter or add attachments to this equipment!
Failure to comply with these CAUTION notices may result in equipment/
property damage and void the warranty.
NOTE:
immediately inspect the unit and
notify the carrier of any damage to the unit.
manual. Refer to the wiring diagram during installation or servicing.
the cleaning and sanitation of equipment.
21
To Next Page
Loading...
