VENTLESS HOOD MAINTENANCE
MODELS VL30 / VL50
Maintenance is necessary for your Ventless Hood System to maintain the
QUARTERLY HOOD CLEANING
During cleaning of the unit:
DO NOT steam clean.
DO NOT use products containing chlorine.
DO NOT use abrasive products, steel wool or scouring pads.
Interior:
mild degreaser with a soft towel or sponge, clean the entire Hood Plenum
and Blower Sections. The hood must be cleaned every 3 months.
Exterior:
Remove power from the unit. Clean all external stainless-steel parts using a
stainless steel cleaner.
Filters:
Bafe Filter:
Filter in a sink and clean with a mild degreaser. Dry thoroughly, then
reinstall in the unit.
Mesh Filter:
with a mild degreaser. Dry thoroughly, the reinstall in the unit.
Charcoal Filter: Never attempt to clean the Charcoal Filter. Replace
every 90 days. Use Replacement Part No. 11-50004. The reuse of a
Charcoal Fileter can cause damage to the unit.
CHARCOAL FILTER
AIR FILTER
DRIP CUP
FILTER INSTALLATION
SEQUENCE
22