CE SERIES OPERATING INSTRUCTIONS
BURN OFF
unit will smoke considerable during this period. Burn off is oil residue and
insulation break in. Allow for good ventilation during this time. There is no
danger if you follow these directions and proceed with care and caution.
1. Turn on toggle switch
2. Set controller for desired temperature
Industrial 0 to 500 degrees
Bake 0 to 550 degrees
Pizza 0 to 650 degrees
* Press ENTER when setting or changing temperature
3. Allow at least one (1) hour for preheat. A longer preheat is better for
complete stabilization of your unit.
4. CE61 B, I and P Models Only
Your oven is equipped with a variable power control for the top deck only.
Set controller for desired temperature and adjust the top to balance top
and bottom decks as needed.
5. To learn how to use this feature, start by setting the top heat control
at 10 and reduce to balance
6. Turn off toggle to shut down unit. Cooling fan may run until a safe
controller temperature is reached. It will then shut down automatically.
3
To Next Page
Loading...
