PEGASUS TECHNOLOGY GRTD-TH3 - Connection to the Generator Without Auxiliary Winding; CONNECTION to the GENERATOR OPERATING in (160 to 300 Vca)

www.pegasustech.com.br 22
CONNECTION TO THE GENERATOR WITHOUT AUXILIARY WINDING
CONNECTION TO THE GENERATOR OPERATING IN (160 to 300Vca)
Attention
➢ Before connecting the regulator to the generator, refer to the installation manual for the
nominal reference voltage;
➢ The supply voltage can’t exceed the maximum voltage specified by the product;
➢ If the reference voltage is note qual to the output voltage of the generator, do not make the
connections without consulting the service center.
Figure 20 – Connection without auxiliary winding with generator operating in the range of 160 to 300Vca
Generator
Load