Pego ECP202 EXPERT + BASE Series - ECP202 Expert + Base LED Display Indicators

ECP202 EXPERT + BASE
Page 13
USE AND MAINTENANCE MANUAL
Rev. 01-20

DOWN / MANUAL DEFROST

ROOM LIGHT
LED DISPLAY

Cold room temperature / parameters

Stand-by (flashes on stand-by. Outputs are deactivated)

Room light (flashes if door switch activated)

Cold (indicates activation of compressor)
Fans
Defrosting
Auxiliary (indicates AUX relay calling if AU1/AU2=+/-2 or +/-3)
Alarm / warning
Decimal point (flashing in night mode)
Hot mode (resistance call signaling)
CHAP. 5 - Parameter programming
5.3