Pego ECP202 EXPERT + BASE Series User Manual

ECP202 EXPERT + BASE
Page 3
USE AND MAINTENANCE MANUAL
Rev. 01-20
INTRODUCTION
Page 4 1.1 Generality
Page 4 1.2 Product ID codes
Page 5 1.3 Overall dimensions
Page 5 1.4 Identification data
INSTALLATION
Page 6 2.1 Important information for the installer
Page 6 2.2 Standard assembly kit
Page 7 2.3 Installing the unit
FUNCTIONS
Page 9 3.1 ECP202 EXPERT + BASE panel functions
TECHNICAL CHARACTERISTICS
Page 10 4.1 Technical characteristics
Page 11 4.2 Warranty terms
PARAMETER PROGRAMMING
Page 12 5.1 Control panel
Page 12 5.2 Frontal keypad
Page 13 5.3 LED display
Page 14 5.4 General
Page 14 5.5 Symbology
Page 14 5.6 Setting and displaying set points
Page 15 5.7 Level 1 programming
Page 15 5.8 List of Level 1 variables
Page 16 5.9 Level 2 programming
Page 16 5.10 List of Level 2 variables
Page 19 5.11 Switching on the ECP202 EXPERT + BASE electronic controller
Page 19 5.12 Hot/cold activation/deactivation conditions
Page 19 5.13 Manual defrost activation / deactivation
Page 20 5.14 Defrost with heater and temperature control
Page 20 5.15 Hot gas defrosting
Page 20 5.16 Pump down function
Page 20 5.17 Password protection
OPTIONS
Page 21 6.1 TeleNET monitoring / supervision system
Page 21 6.2 Net configuration with Modbus-RTU protocol
TROUBLESHOOTING
Page 22 7.1 Troubleshooting
APPENDICES
Page 23 A.1 EU declaration of Conformity
Page 24 A.2 ECP202 EXPERT + BASE wiring diagram
Page 25 A.3 Connection example (1) - ECP202 EXPERT + BASE
Page 26 A.4 Connection example (2) - ECP202 EXPERT + BASE
CONTENTS
CHAP. 1
CHAP. 2
CHAP. 3
CHAP. 4
CHAP. 5
CHAP. 6
CHAP. 7

Pego ECP202 EXPERT + BASE Series Specifications

General

Brand	Pego
Model	ECP202 EXPERT + BASE Series
Category	Control Panel
Language	English