Pego ES3-M User Manual

Page 16
USER MANUAL
INSTALLING THE ES SERIES HUMIDIFIER
1. Remove the humidifier from the packaging: keep it vertical as you do so. Remove the nylon
cover bag and check that the unit is in good condition.
2. Fix the humidifier to the wall, preferably 1 m above the ground and perfectly level (fig. 1); use
the 4 slots at the rear to insert the fixing screws (fig. 2 and 3).
Fig. 1
Fig. 2 Fig. 3
2.2

Pego ES3-M Specifications

General

Brand	Pego
Model	ES3-M
Category	Humidifier
Language	English