Page 6
USER MANUAL
GENERAL
Pego EASYSTEAM sunk-electrode humidifiers are the latest family of humidifiers to be released
onto the market: they are characterised by outstanding completeness of performance and extremely
simple maintenance.
The range includes 3 Kg/h and 6Kg/h humidifiers with single-phase power supply and 6 Kg/h, 12
Kg/h, 24 Kg/h and 48 Kg/h humidifiers with 3-phase + neutral power supply; they all feature
proportional control mode (with 4-20 mA, 0 – 10 V signal) or a simpler ON/OFF control mode.
EASYSTEAM humidifiers feature software with an extensive programming range, full
personalisation and completely automatic operation
This means that the user can set steam output to maximum or some intermediate percentage,
regulate de-concentration emptying frequency or have all the water emptied automatically when the
machine has been idle for a set time.
The EASYSTEAM line also features a display that shows real-time room humidity, the current
being absorbed by the electrodes, working hours, various warnings/alarms, water filling/emptying
status and a full range of user-friendly programming parameters.
EASYSTEAM humidifiers also incorporate a buzzer to warn the user of any faults; the internal
software evaluates the seriousness of the problems and shuts down or continues steam generation
accordingly.
A key advantage of the EASYSTEAM range is that the cylinder with the stainless steel electrodes is
easily changed when normal wear makes such replacement necessary.
CHAP.1 INTRODUCTION
To Next Page
Loading...
Need help?
General
