Page 13
USER MANUAL
IDENTIFICATION DATA
The unit described in this manual has, on its side, an ID plate showing all the relevant identification
data:
• Name of Manufacturer
• Unit model
• Serial number
• Power supply voltage
• Rated current
STANDARD ASSEMBLY KIT
EASYSTEAM humidifiers come complete with:
N° 1 gas connector, ¾”, for water inlet.
N° 1 discharge connector, external diameter 40 mm, with fixing clip on ES models, external
diameter 25 mm on OEM models.
N° 1 steam pipe connector, external diameter 25 mm, for models from 3 to 12 Kg/h and external
diameter of 40 mm for models from 24 to 48 Kg/h with relative fixing clip.
N° 1 user’s manual.
N° 1 Final Test checklist showing:
- Humidifier model
- Default configuration
- Steam production at 100%
- Type of electrical power supply
- Absorbed power in kW
- Rated current absorption
N° 1 ELECTRONIC KIT (for OEM series models only)
- MASTER 100 (electronic control board with PEGO EASYSTEAM software)
- SLIM (electronic controller with screen for control and display)
- TOROIDAL (current absorption sensor)
- CONNECTOR (connector for cylinder connection)
To Next Page
Loading...