Peimar Mirus Series User Manual

101
EN
Data Consistency of Frequency Error (Slave)Error Code 54
If this error occurs frequently, please contact your DNO or contact
Peimar assistance.
Relay Error
Check whether the radiator is blocked, whether the inverter is in too
high or too low temperature, if the above mentioned are in normal,
please contact your DNO or contact Peimar assistance.
Temperature High Error
If this error occurs frequently, please contact your DNO or contact
Peimar assistance.
Storer Error
If this error occurs frequently, please contact your DNO or contact
Peimar assistance.
GFCI Device Error
If this error occurs frequently, please contact your DNO or contact
Peimar assistance.
DCI Device Error
Grid Voltage High (Slave)
Data Consistency of GFCI (Slave)
Grid Voltage Low (Slave)
Frequency High (Slave)
PV2 Voltage High (Master)
Frequency Low (Slave)
No Grid Error (Slave)
PV1 Voltage High (Master)
Lost Communication Between Display board & Control
board (Master)
DRM0 Error (Master)
Table 7.1 Error code
Error Code 61
Error Code 57
Error Code 62
Error Code 67
Error Code 77
Error Code 68
Error Code 73
Error Code 76
Error Code 81
Error Code 85
7.2 Fault Information and troubleshooting

Peimar Mirus Series Specifications

General

Brand	Peimar
Model	Mirus Series
Category	Inverter
Language	English