99
EN
Note:
1. This setting shall be operated when the inverter is under normal grid-
connected state.
2. “All test” is starting from item 1 to item 8 of Selftest.
3. The Selftest results could be reviewed after successful setting.
4. By “All test”, all test results from item 1 to item 8 could be checked all at once.
6.7 Monitoring operation
The equipment is equipped with a RS-232 interface, and the RS-232 interface
can be connected to Wi-Fi module which can be used in the monitoring of the
operation status.
• The equipment can be connected to local internet via a Wi-Fi module and
the Wi-Fi web server which is embedded in the machine; following this, the
operational status of the inverter can be monitored.
• By connecting the Internet through Wi-Fi module and uploading the inverter
data to the server, users can monitor information remotely
To Next Page
Loading...
Need help?
General
