70
EN
Chapter 4 - Instructions for installation
4.1 Safety instructions
4.2 Pre-installation check
4.2.1 Check the package
Although Peimar’s inverters have surpassed stringent testing and are checked
before they leave the factory, it is uncertain that the inverters may suffer damages
during transportation.
Please check the package for any obvious signs of damage, and if such
evidence is present, do not open the package and contact your dealer as soon
as possible.
4.2.2 Check the assembly parts
Please refer to the packing list inside the package container.
DANGER
• Dangerous to life due to potential re or electricity shock.
• Do not install the inverter near any inammable or explosive
items.
• This inverter will be directly connected with HIGH VOLTAGE
power generation device; the installation must be performed
by qualied personnel only in compliance with national and
local standards and regulations.
NOTICE
• This equipment is suitable for the pollution degree II.
• Inappropriate or unharmonized installation environment may
jeopardize the life span of the inverter.
• Installation directly exposed under intensive sunlight is not
recommended.
• The installation site must be well ventilated.
To Next Page
Loading...
Need help?
General
