Peimar Mirus Series User Manual

72
EN
To make sure the installation spot is suitably ventilated, if multiple Peimar grid-
tied solar inverters are installed same area, the following safety clearance in
Figure 4.2 Shall be followed for proper ventilation conditions.
4.4 Mounting procedure
4.4.1 Mark the positions of the drill holes of the rear panel
The mounting position should be marked as shown in Figure 4.3, Figure 4.4,
Figure 4.5.
Figure 4.2 Minimum clearance
Figure 4.3 Dimensions of rear panel of PSI-J1000-TL / PSI-J1500-TL
252,9
211
239
188
265
40
20 20
16
ø8
30 cm 50 cm 50 cm
30 cm30 cm

Peimar Mirus Series Specifications

General

Brand	Peimar
Model	Mirus Series
Category	Inverter
Language	English