Pelpro PPC90 - Intermittent Operation Troubleshooting

PelPro Cast Pellet Stove • 7093-600 • 07/13/16 pelprostoves.com24
Troubleshooting
Troubleshooting
Blockage Related
Fire starts but goes out
• Conrm rebox is clean and clear (Zone 1)
- Ensure repot holes are clear
• Inspect stove body (Zone 2)
- Conrm exhaust probe is connected
- Inspect and clean the exhaust outlet
• Conrm exhaust path is clean and clear (Zone 3)
Starts and stops frequently in automatic mode
• Determine if your room is experiencing varying temperatures due to repeated opening/
closing of doors or windows—correct if necessary
• Examine stove body (Zone 2)
- Inspect ambient probe and conrm that at least 2” is exposed outside of stove
body
Slow or smoky start-up and/or lazy ame
• Conrm exhaust path is clean and clear; clean your repot and behind your bafes
inside your rebox (Zone 3)
• Examine stove body (Zone 2)
- Align igniter so it is properly placed and centered
- Review fuel quality (see Pellet Fuel
information on page 5)
1
Zone
1
Zone
2
Zone
2
Zone
3
Zone
3
Zone