Pelpro PPC90 - Installing Your Stove; Stove Placement Guidelines

PelPro Cast Pellet Stove • 7093-600 • 07/13/16 pelprostoves.com6
Installing Your Stove
Installing Your Stove
Your Home Acts Like a Chimney
We recommend that you help your home by:
1. Using a minimum of 5 feet of vertical venting
2. Use the supplied outside air kit
3. Install your stove on a main oor location
This will:
• Help your stove breathe
• Minimize smoke leakage in the house
• Enhance performance
Clearance to Combustibles
The space between your stove and the items in
your home that could burn. Materials such as:
• Wood
• Sheet rock (drywall)
• Carpet
A
A
B
B
G
E
D
J
Pro Tip
We highly recommend your stove and pellet vent pipe be installed by a professional installer. Your
retailer can make recommendations for you.
Installation MUST comply with local, regional, state and national codes and regulations.
Consult insurance carrier, local building inspector, re ofcials or authorities having jurisdic-
tion over restrictions, installation inspection and permits.
1
2
3
WARNING!
Asphyxiation Risk.
DO NOT INSTALL IN A SLEEPING ROOM. Consumes oxygen in the room.
For Canada, the installation must conform to CAN/CSA-B365
Placement
Where you place your stove can signicantly affect its performance and safety.
Getting Ready