EasyManua.ls Logo

Penn System 450 Series User Manual

Penn System 450 Series
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Refer to the QuickLIT website for the most up-to-date version of this document.
1
System 450™ Series Modular Control Systems with Standard Control
Modules Technical Bulletin
Document Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
System 450 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
System 450 Control Systems with Standard Control Modules . . . . . . . . . . . . . . . . . . . . 4
Control Module and User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Expansion Modules, Module Assemblies, and Outputs . . . . . . . . . . . . . . . . . . . . . . . . . 7
Hybrid Analog Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
System 450 Compatible Sensors and Transducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
High Input Signal Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Differential Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
System 450 Control System Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Detailed Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Designing and Building System 450 Control Systems . . . . . . . . . . . . . . . . . . . . . . . . . 34
Installing System 450 Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Wiring System 450 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Setting up a System 450 Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Setting up Control System Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Determining the Integration Constant for an Analog Output . . . . . . . . . . . . . . . . . . . . 51
Troubleshooting System 450 Control Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Specified Voltage Ranges for Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Repair and Ordering Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
C450CPN-4 and C450CQN-4 Control Modules with Analog Output . . . . . . . . . . . . . . . 63
C450CPW-100C Control Module with Hybrid Analog Output . . . . . . . . . . . . . . . . . . . . 64
C450CBN-4 and C450CCN-4 Control Modules with Relay Output . . . . . . . . . . . . . . . . 65
System 450™ Series Modular Control Systems with
Standard Control Modules
Technical Bulletin
Code No. LIT-12011459
Issued April 2017

Other manuals for Penn System 450 Series

Questions and Answers:

Penn System 450 Series Specifications

General IconGeneral
BrandPenn
ModelSystem 450 Series
CategoryControl Unit
LanguageEnglish

Summary

System 450 Overview

Control Module and User Interface

Hybrid Analog Output

System 450 Compatible Sensors and Transducers

High Input Signal Selection

Differential Control

Sensor Failure Mode

Detailed Procedures

Designing and Building System 450 Control Systems

Guidelines for designing custom control systems using System 450 modules.

Selecting, Installing, and Setting Up Sensors

Procedures for selecting, installing, and configuring sensors for the control system.

Installing System 450 Components

Guidelines for locating and physically mounting System 450 modules.

Setting up a System 450 Control System

Determining the Integration Constant for an Analog Output

Troubleshooting System 450 Control Systems

Technical Specifications

Related product manuals