Pentair AUTOTROL Performa 263 - To advance regeneration cycles; To cancel a regeneration

Installer Manual Performa 263-268 / LOGIX 740-760 - Operation
Ref. MKT-IM-011 / A - 15.06.2017 43 / 64
Immediate double regeneration
A Press and hold to start the second regeneration immediately following the current
regeneration.
→ A solid "x2" symbol will be displayed.
8.3. To advance regeneration cycles
A Simultaneously press and to advance to the next cycle.
→ An hourglass will display while the camshaft is moving.
→ When the camshaft reaches next cycle, "C2” will be displayed.
B Repeat and to advance through each cycle.
8.4. To cancel a regeneration
A Press and hold and for 5 seconds to cancel the regen.
→ Hourglass will flash once cancelled.
→ Camshaft will move to service position – may take 1 to 2 minutes.