Pentair AUTOTROL Performa 263 - Turbine cleaning or replacement

Installer Manual Performa 263-268 / LOGIX 740-760 - Maintenance
50 / 64 Ref. MKT-IM-011 / A - 15.06.2017
9.2.9. Turbine cleaning or replacement
No. Operation
Note
Depending on the valve installation, the turbine may not be present (optional equipment).
A Remove the turbine cable (2) by pushing it up and pulling it from the other side.
B Remove the turbine cable (2) from the cable guide (1).
C Using pliers, gently extract the turbine (3) from the outlet pipe (4) of the valve.
D Clean the turbine (3) using a soft cloth and a brush.
E Reverse above procedure steps to rebuild.
A