NXT Multi Language
Programming Parameters and Ranges
System Type
4
Time
Clock
4
Metered
Immediate
4
Metered
Delayed
Valve Address 12341234 1 2 1234
Select Language x x x xxxxxxxx x x xxxx
System Size x x xx
Regen Type x x x xxxxxxxx x x xxxx
Regenerant Flow x x x xxxxxxxx x x xxxx
Remote Signal Start x x x xxxxx x xxxx
Display Format x x x xxxxxxxx x x xxxx US - Gallons Metric - Liters
Unit Capacity x x xxxxx x x xxxx 9000 - 9900000 Grains 90.0 - 199000.0 Grams
Capacity Safety Factor x x xxxxx x x xxxx
Feed Water Hardness x x xxxxx x x xxxx 1 - 199 Grains/Gallons 2 - 199 mg/l
Regeneration Day Override x x x xxxxx x x xxxx
Regeneration Time
x o o ooooo o o oooo 12:00 a.m. - 11:59 p.m. 00:00 - 23:59 Hour
Cycle 1 x x x xxxxxxxx x x xxxx
Cycle 2 x x x xxxxxxxx x x xxxx
Cycle 3 x x x xxxxxxxx x x xxxx
Cycle 4 x x x xxxxxxxx x x xxxx
Cycle 5 x x x xxxxxxxx x x xxxx
Cycle 6 x x x xxxxxxxx x x xxxx
Auxiliary Relay x x x xxxxu xxx u x xxxx
Aux Relay Output Start
c c c cccccccc c c cccc
Aux Relay Output End
c c c cccccccc c c cccc
Chemical Pump x x xxxxuuxxxx
CPO Aux Relay Volume
c c ccccc c cccc 1 - 999 gallons 00.1 - 99.9 liters
CPO Aux Relay Time
c c ccccc c cccc 00:00:01 - 02:00:00 00:00:01 - 02:00:00
Flow Meter x x xxxxx x xxxx
Generic
x x xxxxx x xxxx
Maximum Flow Rate
a a aaaaa a aaaa
20 - 2000 GPM
2.0 - 200.0 m
3
m
dd Gallons or m
3
a a aaaaa a aaaa 1 - 255 Gallons
1.0 - 25.5 m
3
Every _ _ _ Pulses
a a aaaaa a aaaa 1 - 255 1 - 255
Notes o -
u -
c -
a -
Off, 1 - 99
Downflow, Upflow, Upflow Fill First
Enabled, Disabled
Off, 00:00:00 - 04:00:00
All Relay Output parameters programming will be viewed if Enabled
00:00:00 - 04:00:00
Off, 00:00:00 - 04:00:00
Off, 00:00:00 - 04:00:00
Off, 00:00:00 - 04:00:00
If Auxiliary Relay is Enabled then Chemical Pump Relay will not be viewed or if Chemical Pump Relay is Enabled then Auxiliary Relay will not be viewed.
If Generic Flow Meter is chosen, then programming parameters will be viewed.
00:00:00 to Total Regeneration Time - 1
Start Time + 1 to Total Regeneration Time
1.2t (7000), Generic
Time Clock, Metered Delayed, Metered Immediate
Off, 00:01:00 - 04:00:00
0- 50%
Regeneration Time will only be viewed if Regeneration Day Override is used.
Enabled, Disabled
Programming Parameter Ranges
1 thru 4
1 thru 4
5
Interlock
6
Series
7
Alternating
9
Alternating
Off, 00:00:00 - 04:00:00
English, Espanol