EasyManuals Logo

Pentair NS3-P User Manual

Pentair NS3-P
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
TROUBLESHOOTING
Problem Solution
Water pressure is slowing.
Unlevel
Tank
Boot
Unlevel
Tank
Boot
Level
Tank
Unlevel
Boot
Water leaking at the top of the tank around the head.
You may need to turn the head to tighten it. The tank
head is pre-installed hand-tight, do not overtighten the
head (just turn it snug).
If the tank is not level, lift the tank straight up 6 inches
and tap it on the ground until the tank stands vertical.
The bottom of the tank is round and the boot allows the
tank to stand upright.
It is recommended that the sediment lter be replaced
every 6-9 months depending on the amount of
sediment present in the water supply. If the system has
been working properly and the pressure is slowing, it
may be time to change the sediment lter. Check the
sediment lter and replace if necessary.
The tank leans to one
side or is not level.

for product sanitization instructions.
12•WATER SOFTENER ALTERNATIVE WITH NATURSOFT® SALT-FREE TECHNOLOGY

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentair NS3-P and is the answer not in the manual?

Pentair NS3-P Specifications

General IconGeneral
BrandPentair
ModelNS3-P
CategoryWater Dispenser
LanguageEnglish

Related product manuals