MEDIA SOAK
IN
OUT
Outgoing
Water to
House
Sediment Filter
Bypass Mode
Incoming
Water
Supply
renetfoS reta W Alternative
Wall Wall
INLET
OUTLET
Top View
Note: Steps 1-3 should be done prior to installation
1. Locatethecarbonltertankandthehosebibattachment.
2.Attachthehosebibattachmentto“Inlet”sideofthecarbonlter.Attachgardenhosetothehosebibandturnwaterslowlyuntil
waterowsoutoftheoutletofthetank(astreamofwateraboutthesizeofapencil).Allowthiswatertoowoutfor15minutes.
(Notetherstfewgallonsofwatercouldlookblackandcloudyduetothecarbonnes,thisisanormaloccurrence).
3.After15minutes,turnwaterofffor1minute.Thenturnwateronforfullyfor1minute,andthenturnoffandwait1minute.
Continuethisprocessuntilwatercomesoutoftheoutletclear.Whencomplete,removehosebibattachment.
4.Shouldyoulosewaterpressurewhilecompletingstep3,turnwateroff,andallowthetanktosettlewithnowaterusage.
Repeatstep3,butreducehowfastyouushthetank.
to use an outside garden hose spigot or faucet with an aerator to perform the rinsing procedure.
6•WATER SOFTENER ALTERNATIVE WITH NATURSOFT® SALT-FREE TECHNOLOGY