To Next PageTo Next Page
Need help?Do you have a question about the Pentair Pentek Intellidrive and is the answer not in the manual?
General| Category | DC Drives |
|---|---|
| Model | Intellidrive |
| Manufacturer | Pentair |
| Output Voltage | Variable |
| Communication Interface | RS485 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
Comprehensive guide to safe operation and installation of the PENTEK INTELLIDRIVE.
Details warnings related to electrical shock, wet conditions, and internal components.
Covers fire hazards, burn risks, and guidelines for complex equipment handling.
Section for recording model, serial, and installation specifics for future reference.
Outlines the technical specifications, input/output voltage, and operating parameters.
Describes the transducer, keypad, and internal fan functions of the PENTEK INTELLIDRIVE.
Provides guidelines for selecting appropriate circuit breakers and wire gauges for installation.
Step-by-step instructions for physically mounting the PENTEK INTELLIDRIVE enclosure.
Details on electrical wiring, input power, and motor connections for the drive.
Covers pressure tank recommendations, transducer connections, and input power.
Guide for initial drive setup, including applying power and configuring service factor amps.
Instructions for pump out, system priming, and adjusting parameters post-startup.
How to manage keypad lock, password, and adjust the pressure setpoint.
Details available commands and parameters for Time/Date and PID Control settings.
Covers setpoint, motor phase, type, and service factor amp parameter settings.
Configuration for dry run detection, I/O settings, and software updates.
Explanation of using digital inputs for control and output relays for status indication.
Comprehensive table detailing the function, connection, and rating of each I/O terminal.
Guidance on RS-485 communication and lightning/surge protection devices.
List of available accessories, replacement parts, and retrofit application notes.
Identifies causes and solutions for faults related to current, voltage, starting, dry run, and ground issues.
Addresses issues with transducers, over-temperature, excessive runtime, and external faults.
Step-by-step guide for performing a factory reset on the PENTEK INTELLIDRIVE.
Recommendations for installing the drive in an EMC shielded enclosure and mounting procedures.
Details on proper earthing connections and requirements for shielded motor cables.
Information on warranty, sales contacts, and customer service for Pentair Australia/NZ.
Legal notice regarding manual accuracy, responsibility, and proprietary information.
