WHOLE HOUSE WATER SOFTENING SYSTEM • 13
QUICK START GUIDE: SYSTEM START-UP INSTRUCTIONS CONTINUED
14. Return to the Home Screen and then advance back to refill:
Press the SCROLL button to advance to the home position. The control will display the home screen,
press the scroll button 2 times. The 10 second Countdown will begin and the cycle will start again.
Wait for the motor to stop at cycle 1, then advance by pressing scroll button 1 time. Wait for the motor
to stop at cycle 2, then advance to cycle 3 by pressing the scroll button 1 time. Stay in cycle 3 for the
duration of the cycle, confirm refill and add salt to the tank. The system will add the correct amount of
water to the salt tank.
15. Test the cold water and verify meter operation:
Open a cold faucet, Run the cold water until you achieve soft water. While the water is flowing, check
the gallons remaining on the home screen and verify that the number is decreasing. This will confirm
that the system is counting gallons. Open a faucet on the hot water side until it turns cold in order to
drain the hot water tank to ensure all of the water is treated. Explain the system basics and answer any
questions they may have.
To Next Page
Loading...
