Pentax 67II - X-Sync Terminal

ADVANCED OPERATION
62
Overview of Flash Function
Using other types of flash
● Use of non-Pentax flash units may damage the camera. For the best results, use a Pentax dedicated flash unit.
● Some large studio type flashes may have inverted contacts, and will therefore not fire when attached to a 672 camera.
For further information, contact the flash unit manufacturer. To prevent the view from being vignetted by the second shutter
curtain, it is recommended that you use a shutter speed one step slower than the flash sync speed.
● The secondary functions do not work when the cord is connected to the X-sync terminal only.
CAMERA FUNCTION TYPE A TYPE B TYPE C TYPE D
After the flash is charged, the camera automatically
switches to the flash-sync speed (1/30 of a second).
NNNN
Flash confirmation signal in the viewfinder and LCD panel NN
TTL auto flash NNN
Slow-speed sync in the Metered Manual Mode NNNN
Trailing-shutter-curtain sync flash*
2
NN
Contrast-control flash mode*
2
N
TYPE A : AF540FGZ, AF500FTZ*
3
, AF330FTZ, AF360FGZ *1 : The AF200SA and AF201SA do not operate.
TYPE B : AF400FTZ, AF240FT *2 : The shutter speed is 1/15 or slower.
TYPE C : AF400T, AF280T, AF220T, AF200T, AF201SA,
AF200SA
*3 : Multi-burst and slave-sync flash are possible.
TYPE D : AF200S, AF160, AF140
*
1