EasyManua.ls Logo

Pentax EPK-700 - Power Requirements; Symbols on Marking; Conventions

Pentax EPK-700
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POWER REQUIREMENTS
Check the standard power plug configurations that are used in your country. If the appropriate power cord is not included in your
product, notify your local Pentax distributor.
SYMBOLS ON MARKING
CONVENTIONS
The following conventions have been established in the text of this manual to aid in the identification of potential hazards of
operation;
: Could result in death or serious injury.
: May result in minor or moderate injury or property-damage.
: May result in property-damage. Also, advises owner/operator about important information on the use of
this equipment.
3
Continental Europe
(Use a SEV approved
plug for Switzerland)
U.K. Australia
and
New Zealand
U.S.A. and
Canada
(Hospital Grade)
Alternating current
Type BF applied part (Safety degree specified by IEC60 601-1)
OFF (Power : disconnection from mains)
ON (Power : connection to the mains)
Attention, consult Owner’s Manual
Protective earth (ground)
CAUTION
NOTE
WARNING

Related product manuals