20
1 Pass the end of the strap
through the strap lug and
secure it on the inside of
the clasp.
2 Attach the other end in the same manner.
1 Make sure that the camera is turned off.
2 Remove the body mount
cover (1) and lens mount
cover (2).
After removing the cover, be sure
to put the lens down with the lens
mount side facing upward.
3 Align the lens mount index
(red dots: 3) on the
camera and the lens, and
secure by turning the lens
clockwise until it clicks.
To remove the lens
Attach the lens cap, and then turn
the lens counterclockwise while
pressing the lens unlock button
(4).
Getting Your Camera Ready for
Use
Attaching the Strap
Attaching a Lens
3
4
To Next Page
Loading...
Need help?
General
