Pentax K-S1 User Manual

31
1 Press C in standby mode.
2 Select a flash mode.
3 Press E.
The camera returns to standby mode.
4 Press 1.
The built-in flash is popped up.
t Memo
• The flash modes that can be selected vary depending on the
capture mode.
Setting the Flash Mode
Y
A
Auto Flash
Discharge
Automatically measures the ambient light and
determines whether to use the flash.
B
Auto Flash
+Red-eye
Reduction
Discharges a pre-flash for red-eye reduction
before an automatic flash.
C
Flash On Discharges a flash for each picture.
D
Flash On
+Red-eye
Reduction
Discharges a pre-flash for red-eye reduction
before the main flash and discharges a flash
for each picture.
E
Slow-speed
Sync
Sets to a slow shutter speed.
Use this, for example, when shooting a portrait
with the sunset in the background.
F
Slow-speed
Sync+Red-
eye
Discharges a pre-flash for red-eye reduction
before the main flash is discharged with Slow-
speed Sync.
H
G
Trailing
Curtain
Sync
Discharges a flash immediately before closing
the shutter.
Sets to a slow shutter speed.
Captures moving objects as if they are leaving
a light trail behind them.
K
Manual
Flash
Discharge
Sets the amount of flash discharge between
FULL and 1/128 power.
0 . 0
0.0
Auto Flash Discharge
Auto Flash Discharge
Cancel
Cancel
OK
OK

Pentax K-S1 Specifications

General

Brand	Pentax
Model	K-S1
Category	Digital Camera
Language	English