64
Basic Operations
3
3
Use the four-way controller (45) to choose a flash mode.
Turn the e-dial to perform Flash exposure compensation. (p.128)
4
Press the 4 button.
The camera is ready to take a picture.
1
Set the mode dial to H, I , =, q, \ or ..
2
Press the shutter release
button halfway.
The built-in flash pops up if necessary
and begins charging. When the flash is
fully charged, b appears in the LCD
panel and viewfinder. (p.27, p.29)
When the mode dial is set to e, K, b, c, a or p, g and i appear gray
and cannot be selected.
Using Auto Discharge
g
,
i
(Automatic Flash Popup)
The flash is deactivated when A (Night Scene), K (Sunset),
D (Candlelight) or E (Museum) is selected in H (Scene) mode.
Switch between Auto discharge mode
and Flash On mode by pressing the K
button while the built-in flash is popped
up. If Auto discharge is set, E appears
on the LCD panel.
To Next Page
Loading...
