65
Basic Operations
3
3
Press the shutter release button fully.
The picture is taken.
4
Push down on the portion
indicated in the illustration to
retract the flash.
1
Press the K button.
The built-in flash pops up and begins
charging. Flash On mode is used
regardless of the flash mode settings.
When the flash is fully charged, b
appears in the LCD panel and
viewfinder. (p.27, p.29)
2
Press the shutter release button fully.
The flash discharges and the picture is taken.
3
Push the flash down to retract.
Using Flash On Mode
b
,
D
When Flash mode is set to g or i and
you pop up the built-in flash, you can
switch between Auto discharge mode
and Flash On mode by pressing the K
button under the following conditions.
• Shooting mode is set to I, =, s,
q, \, or ..
• H mode is set to i, K, C, or E.
To Next Page
Loading...
