EN-26
Setting the Date and Time
Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to and turn your camera on by pressing
the power switch.
2. [Set-up1] is displayed.
3. Use the four-way controller (T) to select [Date Adjust] and the
four-way controller (WX) to switch the date types,then press the
button.
4. Press the four-way controller (WX) to select Day, Month, Year and
Time fields.
To increase a value, press the four-way controller (S).
To decrease a value, press the four-way controller (T).
The time is displayed in 24-hours format.
5. Press the button after all fields are set.
The date illustration shown is for the purpose of explanation and may differ from the actual setting of your camera.
To Next Page
Loading...
Need help?
General
