Pentax Optio E10 - Connecting Camera to Computer via USB; Establishing the USB Connection for Data Transfer

EN-62
Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing
the power switch.
2. Press the four-way controller (X) to select the [Set-up2] menu,
then use the four-way controller (T) to select [USB Con.].
3. Press the button.
4. Use the four-way controller (T) to select [PC], then press the
button.
5. Turn off your camera.
6. Connect your camera and the computer via the supplied USB
cable.
7. Turn your camera on by pressing the power switch.
8. There will be a new “Removable Disk” icon detected in “My
Computer”, which contains your recorded images or movie clips.
(For Mac users, double-click [untitled] or [unlabeled] disk drive
icon on our desktop.)
PC/AV terminal