EN-52
Protecting Images/Movie Clips
Set the data to read-only to prevent images from being erased by mistake.
1. Press the button.
The last recorded image appears on the LCD monitor screen.
2. In the mode, use the four-way controller (WX) to select the
desired images.
To view the previous image, press the four-way controller (W).
To view the next image, press the four-way controller (X).
3. Press the MENU button, then use the four-way controller(T) to
select [Protect] and press the button.
4. Use the four-way controller (ST) to choose the desired setting,
then press the button.
[This Image]: Protect one image/movie.
[All Images]: Protect all images/movies (at once).
5. Use the four-way controller (ST) to select [Protect], then press
the button to confirm.
Press the MENU button to return to the mode. The
indicator appears on the selected image.
If you wish to cancel the protect function of a protected image,
select [Unprotect].
To Next Page
Loading...
Need help?
General
