EN-38
Adjusting the Exposure (EV Compensation)
You can manually adjust the exposure determined by the digital camera. Use this mode when the proper
exposure cannot be obtained, for example, when the contrast (difference between bright and dark areas)
between the subject and the background is extremely high. The EV compensation value can be set in the
range from -2.0EV to +2.0EV.
1. Rotate the mode dial to , , , or .
2. Press the power switch to turn on the power.
3. Press the four-way controller (T/ ) and use WX to set the range
of EV compensation value from -2.0EV to +2.0EV.
4. Press the button to confirm the setting.
To Next Page
Loading...
Need help?
General
