EN-39
Setting White Balance
This feature lets you make adjustments to compensate for different lighting types according to your shooting
conditions.
1. Rotate the mode dial to , , , or .
2. Press the power switch to turn on the power.
3. Press the MENU button. [Menu1] is displayed.
4. Use the four-way controller (T) to select [White Balance], then
press the button.
5. Use the four-way controller (ST) to select the desired white
balance setting, then press the button to confirm.
6. To cancel the setting, press the MENU button and exit the menu.
To Next Page
Loading...
Need help?
General
