EN-34
DRIVE MODE
High Speed Continuous
This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter release button
is pressed. Secure the camera to a tripod or place it on a stable surface.
1. Rotate the mode dial to , , , , or .
2. Press the power switch to turn on the power.
3. Press the four-way controller (S/ ) and use (S) to select [High
Speed Continuous]. You can also change the setting using
four-way controller (WX).
4. Press the button to confirm the setting. The indicator is
displayed on the monitor screen.
5. Press the shutter release button halfway to lock the focus.
6. Press the shutter release button to capture a sequence of images.
In High Speed Continuous mode, the flash mode will be set to Flash Off automatically.
Drive Mode
High Speed Continous
10
2
To Next Page
Loading...
