EN-35
Auto Bracket
In this mode, the camera automatically changes the exposure within a set range to take three shots after you
press the shutter release button once. Auto Bracket settings can be combined with exposure compensation
settings to extend the adjustment range.
1. Rotate the mode dial to , , , , or .
2. Press the power switch to turn on the power.
3. Press the four-way controller (S/ ) and use (S) to select
[Auto Bracket]. You can also change the setting using the four-way
controller (WX).
4. Press the button to confirm the setting. The indicator is
displayed on the LCD monitor screen.
5. Press the shutter release button to capture the three images.
In Auto Bracket mode, the flash mode will be set to Flash Off automatically.
To Next Page
Loading...
