EN-85
Flash does not fire. * Flash off is selected in flash mode.
* 10+2 sec. Self-timer is selected in
self-timer mode.
* The [Drive Mode] is set to [High Speed
Continuous] or [Auto Bracket].
* The camera is in the (movie) mode.
* Select a different flash mode.
* Select [Standard] in the [Drive Mode].
* Switch the mode dial to another
mode.
Continuous shooting is
not possible.
* The capacity of the built-in memory or
SD memory card is full.
* Insert SD memory card with available
space or delete unwanted images.
Cannot transfer files
over a USB
connection.
* USB cable is not connected securely.
* USB driver is not installed.
* Camera is turned off.
* Check all connections.
* Install the USB driver on your
computer.
* Turn on the camera.
Symptom Possible causes Solutions / Corrective Actions
To Next Page
Loading...
