EN-75
Set-up2 settings
Item Functional Description
USB Con. Used to choose one of the following modes for further settings.Refer to the section in this
manual titled “Connecting to a PictBridge-Compatible Printer” (EN-55) and Step 2 in
“TRANSFERRING FILES FROM YOUR DIGITAL CAMERA TO COMPUTER” (EN-60)
for further details.
PC / PictBridge
Video Out Sets video output of the camera to match the video output system of the equipment that
you are going to connect to the camera.
PAL / NTSC
Brightness This sets the brightness of the LCD monitor.
The adjustment range is from -5 to +5.
Auto Power Off If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful to reduce battery wear. The Auto Power Off
function will not work when the USB cable is connected.
2 min. / 3 min. / 5 min. / Off
To Next Page
Loading...
Need help?
General
